3.3 Cable outlets
Cable outlets are defined by the user. Axial and right-angle cable outlets are possible; a right-angle cable outlet can be executed radially or tangentially. This section presents drawings and dimensions for the three standard cable outlet variants — axial, radial and tangential — in order of size. Dimensions and bending radii are listed in a table on page 18 (Table 2). Performance data and geometric data can be found in the product tables.
About the index numbers
The circled numbers ①②③ in each cable outlet drawing correspond to the winding design and the number of power cables for that model, as shown in the tables below. The dimensional callouts in the drawings (such as HP2, HP3 and the various length/height values) are all given in mm.
Cable outlets for RKI5-3P-230xH
Data for motor selection can be found in the product tables. The cable outlet positions are assigned as follows:
- ① RKI5-3P-230xH-Z2, 1×4G10
- ② RKI5-3P-230xH-Z3.3, 2×4G10
- ③ RKI5-3P-230xH-Z4, 3×4G10
Cable outlet positions
Top view of the cable outlet positions for the three winding variants. ① (Z2, 1×4G10) has a single outlet position; ② (Z3.3, 2×4G10) is a symmetrical twin outlet; ③ (Z4, 3×4G10) is a three-outlet arrangement, with a 67.5° angle marked on each side.
Axial cable outlet
Axial cable outlet: the side view shows the axial cable screw height HP2 (=10). Variant ② (Z3.3) has a top-view width of 106 and a height of 40; variants ①③ (Z2／Z4) have a top-view width of 65 and a height of 39.
Radial cable outlet
Radial cable outlet: the side view shows the right-angle bend with the right-angle cable screw height HP3 (=10). Variant ② (Z3.3) has a top-view width of 106 and a height of 40; variants ①③ (Z2／Z4) have a top-view width of 65 and a height of 39.
Tangential cable outlet
Tangential cable outlet: the side view shows HP3 (=10). Variant ② (Z3.3) has a tangential extension width of 106 and a height of 40; variants ①③ (Z2／Z4) have a width of 65 and a height of 39.
| Index | Designation | Power cable |
|---|---|---|
| ① | RKI5-3P-230xH-Z2 | 1×4G10 |
| ② | RKI5-3P-230xH-Z3.3 | 2×4G10 |
| ③ | RKI5-3P-230xH-Z4 | 3×4G10 |
Cable outlets for RKIB11-3P-298xH
Data for motor selection can be found in the product tables. The cable outlet positions are assigned as follows:
- ① RKIB11-3P-298xH-Z3.8, 1×4G10
- ② RKIB11-3P-298xH-Z5.7, 2×4G10 ／ RKIB11-3P-298xH-Z6.1, 2×4G10
- ③ RKIB11-3P-298xH-Z7.9, 4×4G10
Cable outlet positions
Top view of the cable outlet positions for the three winding variants: ① (Z3.8, 1×4G10), ② (Z5.7／Z6.1, 2×4G10), ③ (Z7.9, 4×4G10).
Axial cable outlet
Axial cable outlet: the side view shows the axial cable screw height HP2 (=10). Variant ① (Z3.8) has a top-view width of 70 and a height of 46.5; variants ②③ (Z5.7／Z6.1／Z7.9) have a top-view width of 110 and a height of 46.5.
Radial cable outlet
Radial cable outlet: the side view shows the right-angle bend with the right-angle cable screw height HP3 (=10). Variant ① (Z3.8) has a top-view width of 70 and a height of 42.5; variants ②③ (Z5.7／Z6.1／Z7.9) have a top-view width of 110 and a height of 46.5.
Tangential cable outlet
Tangential cable outlet: the side view shows HP3 (=10). Variant ① (Z3.8) has a tangential extension width of 70 and a height of 42.5; variants ②③ (Z5.7／Z6.1／Z7.9) have a width of 110 and a height of 46.5.
| Index | Designation | Power cable |
|---|---|---|
| ① | RKIB11-3P-298xH-Z3.8 | 1×4G10 |
| ② | RKIB11-3P-298xH-Z5.7 | 2×4G10 |
| ② | RKIB11-3P-298xH-Z6.1 | 2×4G10 |
| ③ | RKIB11-3P-298xH-Z7.9 | 4×4G10 |
Cable outlets for RKIB5-3P-384xH
Data for motor selection can be found in the product tables. The cable outlet positions are assigned as follows:
- ① RKIB5-3P-384xH-Z5.8, 2×4G10
- ② RKIB5-3P-384xH-Z7.2, 2×4G16
- ③ RKIB5-3P-384xH-Z8.4, 4×4G10
Cable outlet positions
Top view of the cable outlet positions: ①② (Z5.8／Z7.2) share one set of outlet positions; ③ (Z8.4, 4×4G10) uses a separate set of outlet positions.
Axial cable outlet
Axial cable outlet: the side view shows the axial cable screw height HP2 (=10). Variants ①②③ have a top-view width of 135 and a height of 55.5.
Radial cable outlet
Radial cable outlet: the side view shows the right-angle bend with the right-angle cable screw height HP3 (=10). Variants ①②③ have a top-view width of 135 and a height of 55.5.
Tangential cable outlet
Tangential cable outlet: the side view shows HP3 (=10). Variants ①②③ have a tangential extension width of 135 and a height of 55.5.
| Index | Designation | Power cable |
|---|---|---|
| ① | RKIB5-3P-384xH-Z5.8 | 2×4G10 |
| ② | RKIB5-3P-384xH-Z7.2 | 2×4G16 |
| ③ | RKIB5-3P-384xH-Z8.4 | 4×4G10 |
Cable outlets for RKIB11-3P-460xH
Data for motor selection can be found in the product tables. The cable outlet positions are assigned as follows:
- ① RKIB11-3P-460xH-Z7.5, 2×4G16
- ② RKIB11-3P-460xH-Z6.0, 2×4G10
- ③ RKIB11-3P-460xH-Z8.0, 3×4G10
Cable outlet positions
Top view of the cable outlet positions for the three winding variants: ① (Z7.5, 2×4G16), ② (Z6.0, 2×4G10), ③ (Z8.0, 3×4G10).
Axial cable outlet
Axial cable outlet: the side view shows the axial cable screw height HP2 (=10). Variant ① (Z7.5) has a top-view width of 130 and a height of ~53.5; variant ② (Z6.0) has a width of 125 and a height of ~53.5; variant ③ (Z8.0) has a width of 95 and a height of ~51.
Radial cable outlet
Radial cable outlet: the side view shows the right-angle bend with the right-angle cable screw height HP3 (=10). Variant ① (Z7.5) has a top-view width of 130 and a height of ~53.5; variant ② (Z6.0) has a width of 125 and a height of ~53.5; variant ③ (Z8.0) has a width of 95 and a height of ~51.
Tangential cable outlet
Tangential cable outlet: the side view shows HP3 (=10). Variant ① (Z7.5) has a tangential extension width of 130 and a height of ~53.5; variant ② (Z6.0) has a width of 125 and a height of ~53.5; variant ③ (Z8.0) has a width of 95 and a height of ~51.
| Index | Designation | Power cable |
|---|---|---|
| ① | RKIB11-3P-460xH-Z7.5 | 2×4G16 |
| ② | RKIB11-3P-460xH-Z6.0 | 2×4G10 |
| ③ | RKIB11-3P-460xH-Z8.0 | 3×4G10 |
Cable outlets for RKIB11-3P-690xH
Data for motor selection can be found in the product tables. The cable outlet positions are assigned as follows:
- ① RKIB11-3P-690xH-Z7.5, 2×4G16
- ② RKIB11-3P-690xH-Z6.1, 2×4G10
- ③ RKIB11-3P-690xH-Z8.8, 5×4G10
Cable outlet positions
Top view of the cable outlet positions for the three winding variants: ① (Z7.5, 2×4G16), ② (Z6.1, 2×4G10), ③ (Z8.8, 5×4G10). Variant ③ has a 67.5° angle marked on each side.
Axial cable outlet
Axial cable outlet: the side view shows the axial cable screw height HP2 (=10). Variant ① (Z7.5) has a top-view width of 148 and a height of 58.4; variant ② (Z6.1) has a width of 100 and a height of 50.5; variant ③ (Z8.8) has a width of 95 and a height of 50.5.
| Index | Designation | Power cable |
|---|---|---|
| ① | RKIB11-3P-690xH-Z7.5 | 2×4G16 |
| ② | RKIB11-3P-690xH-Z6.1 | 2×4G10 |
| ③ | RKIB11-3P-690xH-Z8.8 | 5×4G10 |
Note: Section 3.3.5 of the catalogue for the RKIB11-3P-690xH provides only the cable outlet positions (Figure 42) and the axial cable outlet (Figure 43); no separate radial and tangential cable outlet drawings are given.
Note: All dimensional values are given in mm. Binding data and drawings will be provided separately by agreement; support from a Schaeffler engineer is recommended during the motor design stage. Specifications are subject to change without notice.