Check List for Your Enquiry

This check list applies to the full IDAM RDDS product family (RDDS1 / RDDS2 Matrix and RDDS-20-B). Please fill in the items below and send them to us. Our sales team will get back to you as soon as possible. Click the button below to open your email client — it will include a complete enquiry template ready to fill in and send (with reference examples pre-filled).

The "e.g.:" notes next to each field below are reference examples taken from this product series' catalogue specifications (not recommended values). They are provided solely to illustrate the expected format and a reasonable range of values.

Basic Information

System Requirements

• Brief descriptione.g.: Rotary indexing table application requiring high positioning accuracy
• Motor / System / Axis within a multi-axis systeme.g.: Complete system
• Position of the rotary axis in the spacee.g.: Vertical
• Type of weight compensatione.g.: None
• Installation conditions for drive (if required, diagram or drawing)
• Max. installation dimensions [mm]: length / width / heighte.g.: Ø390 × H285 (ref. RDDS2-390x285)
• Mechanical interfacee.g.: Base plate mounting

Ambient Conditions

• Temperature [K]
• Contamination
• Degree of protection (IP)

Movement Quantities

• Angle of rotation φ [degrees]e.g.: 22.5° (ref. catalogue positioning cycle example)
• Additional mass moment of inertia [kgm²]e.g.: 0.0125 kgm² (ref. catalogue positioning cycle example)
• Interfering forces [Nm]
• Maximum rotary speed [rpm]e.g.: 200 rpm (RDDS2-240 limiting speed)
• Synchronism variations [%] at rotary speed
• Shortest acceleration or delay time [ms]e.g.: 32 ms (ref. catalogue positioning cycle example)
• Overswinging in position [degrees]
• Response time [ms]
• Typical cycle per unit of time (diagram)
• Life / operating hours [h]

Required Accuracies

• Over diameter [mm]
• Radial accuracy [µm]e.g.: ±10 µm (catalogue radial run-out)
• Axial accuracy [µm]e.g.: ±10 µm (catalogue axial run-out)
• Positioning / repeatability [arcsec]e.g.: positioning ≤30 arcsec, repeatability ≤5 arcsec (ref. RDDS1 spec)

Cooling

• Cooling permissible: Yes / Noe.g.: Yes
• Cooling medium: Oil / Water / Aire.g.: Water
• Max. permissible heating of the primary [K]
• Max. permissible heating of the secondary [K]

Controller

• Present: Yes / No
• Controller type
• Components:
  • Only servo-regulator
  • Complete controller
• Positioning:
  • Point-to-point controller
  • Track control
• Interfaces
• Options

General Information

• Accessories
• Type: Prototype for series / Individual pieces / Series
• Probable annual requirement
• Planned start of production
• Price expectation or costs for existing solution
• Desired quotation deadline