This index lists the terms, type codes and abbreviations used in this catalogue in alphabetical order, together with the chapter in which each is described.
| A | Chapter |
|---|---|
| A rail | 3.3 |
| AA-RF | 5.1 |
| AC | 5.1 |
| Accelerations | 5 / 6 / 9.5 / 10.2 |
| Accuracy and accuracy classes | 7.1 / 9.2 |
| AK | 5.1 |
| Angular error | 13.2 |
| Application-specific solutions | 3.5 |
| Assembly guidelines | 13.9 |
| B | Chapter |
| B rail | 3.3 |
| C | Chapter |
| C rail | 3.3 |
| Cage | 5 |
| Cage length | 11.1 |
| Cage control | 5.2 / 5.3 / 7.8 / 7.9 |
| Centralised lubricating system | 8.2 / 13.7 |
| Chemical substances | 2.2 |
| Coating | 7.6 / 7.7 |
| Connecting structure | 13.1 / 13.2 |
| Cover | 13.6 |
| Correction factor | 12.3 |
| Corrosion-resistant steel | 7.2 |
| Customer-specific design | 3.5 |
| D | Chapter |
| Design | 11 |
| Design guidelines | 13 |
| D hole | 7.10 |
| D rail | 3.3 |
| Double V-shaped guide | 5.1 |
| DR | 7.7 |
| Drawings (2D and 3D) | 2.1 |
| DRC1 | 7.7 |
| Dry Runner | 7.7 |
| DU | 7.6 |
| DURALLOY® | 7.6 |
| Dynamically equivalent load | 12.3 |
| E | Chapter |
| EAM | 5.5 |
| Earlier generations of the product | 3.3 |
| EAV | 5.5 |
| EE | 5.1 |
| Effective load carrying capacity | 12.3 |
| EG | 7.3 |
| EHA | 7.5 |
| Elastic deformation | 12.5 |
| EM | 5.5 |
| Emergency running characteristic | 7.6 |
| Enclosed configuration | 13.3 |
| End pieces | 5 |
| End screws | 5 |
| E rail | 3.3 |
| EV | 5.5 |
| Event probability | 12.3 |
| Example calculations | 12.4 |
| Examples of use | 4 |
| F | Chapter |
| Fastening | 13.4 |
| Fastening screws with thin shaft | 5.1 / 5.2 / 5.3 / 5.4 |
| Fixing holes | 5 / 6 / 7.10 / 9.3 |
| FORMULA-S | 5.2 / 5.3 / 7.8 |
| Friction | 9.6 / 10.3 |
| G | Chapter |
| GA | 5.1 / 5.2 |
| GAN | 5.2 |
| GB | 5.1 |
| GBN | 5.3 |
| GC | 5.1 |
| GC-A | 5.1 |
| GCN | 5.3 |
| GCN-A | 5.3 |
| GD | 5.1 / 5.2 / 5.4 |
| GDN | 5.3 |
| GFN | 5.4 |
| GFO | 5.4 |
| GH | 5.4 |
| GH-A | 5.4 |
| G hole | 7.10 |
| GP | 8.1 |
| GW | 5.4 |
| GW-A | 5.4 |
| H / I / J | Chapter |
| HA | 7.5 |
| Handling | 13.8 |
| Hardness | 5 / 6 |
| Hardness factor | 12.3 |
| Height-matched linear guideways | 7.5 |
| Height offset | 13.2 |
| Hole types | 5 / 6 / 7.10 |
| Stroke | 11.1 |
| HW | 5.4 / 5.5 |
| Installation methods | 13.3 |
| Installation guidelines | 13 |
| J / K | 3.3 |
| K | Chapter |
| KBN | 5.2 / 5.3 |
| KBS | 5.2 / 5.3 |
| KS | 5.2 / 5.3 / 7.8 |
| KZST | 5.4 / 5.5 / 7.9 |
| L | Chapter |
| Linear guideways ground together | 7.4 |
| L / M | 3.3 |
| Load carrying capacity | 12 |
| Loading capacity | 5 / 6 / 12 |
| Locating surface | 7.1 / 13.1 / 13.2 |
| Lubrication | 12.2 / 13.7 |
| Lubricating stroke | 12.2 |
| M | Chapter |
| Matched recirculating units | 8.1 |
| Materials | 5 / 6 |
| Minimal lubrication | 7.7 |
| Multi-part linear guideways | 7.4 |
| Moment loads | 5 / 6 |
| M / V | 3.1 / 5.5 |
| N | Chapter |
| N / O | 3.1 / 5.4 |
| Normal quality | 7.1 |
| NQ | 7.1 |
| NRT | 3.2 / 6.4 |
| NRV | 3.2 / 6.4 |
| Number of rolling elements | 11.1 |
| O | Chapter |
| Open configuration | 13.3 |
| Operating temperatures | 5 / 6 / 9.4 / 10.1 |
| Options | 7 / 8 |
| Order descriptions | 14 |
| Oscillating motion | 12.2 |
| Overrunning cage | 5 / 11.1 |
| Overview of products | 3 |
| P / Q | Chapter |
| Parallelism tolerances | 7.1 |
| Part Server | 2.1 |
| Preload | 13.5 |
| Preload wedge | 6.4 |
| Product specifications | 5 / 6 |
| Product overview | 3 |
| Quality classes | 7.1 |
| R | Chapter |
| Ra value | 13.2 |
| RD | 3.1 / 5.1 |
| REACH | 2.2 |
| Recirculating unit | 3.2 / 6 / 11.2 |
| RF | 7.2 |
| Rigidity | 12.5 |
| R linear guideway | 3.1 / 5.1 |
| RN | 3.1 / 5.2 |
| RNG | 3.1 / 5.3 |
| RoHS | 2.2 |
| Run-ins rounded | 7.3 |
| S | Chapter |
| Seal | 13.6 |
| Sealing rings | 13.7 |
| Service life | 12.1 / 12.2 / 12.3 / 13.1 |
| Short stroke | 12.2 |
| SHW | 5.4 / 5.5 |
| SK | 3.2 / 6.1 |
| SKC | 3.2 / 6.2 |
| SKD | 3.2 / 6.1 |
| Sliding guideway | 3.4 |
| Spacings between fixing holes | 9.3 |
| Speeds | 5 / 6 / 9.5 / 10.2 |
| Special versions | 7 / 8 |
| SQ | 7.1 |
| SR | 3.2 / 6.3 |
| SSQ | 7.1 |
| Standard parameter | 9 / 10 |
| Storage | 13.8 |
| Subsequent lubrication | 13.7 |
| Supporting surface | 7.1 / 9.2 / 13.2 |
| Surface quality | 13.2 |
| T | Chapter |
| Temperatures | 5 / 6 / 9.4 / 10.1 |
| Temperature factor | 12.3 |
| Tolerance of the supporting surface to the track | 9.2 |
| Torque settings for adjusting screws | 13.5 |
| Torque settings for fastening screws | 13.5 |
| Transport | 13.8 |
| U / V / W / X / Z | Chapter |
| Units | 2.4 |
| Vacuum suitability | 5.1 / 5.2 / 5.3 / 6.2 / 7.6 / 7.7 / 7.8 |
| V hole | 7.10 |
| Web site | 2.1 |
| Wipers | 5.1 / 5.3 / 5.4 / 5.5 / 6.1 / 6.2 / 6.4 |
| W / Z | 3.3 |
| ZG | 7.4 |
| ZS | 8.2 |