NH2 positioning table (micrometer side, MS)
Product Description
Single-axis stages with SCHNEEBERGER linear bearings Type R2-RF. Manual positioning with micrometer, reading accuracy 0.01 mm. The table parts are lightly loaded onto the micrometer screw by a tension spring. The design is available with or without micrometer, with or without spring. Micrometer fastening on the side or front of the stage. Tables of the same size can easily be assembled into a 2-axis configuration. Standard strokes 13/13 and 25/(40) mm. Special hole patterns or strokes on request. All designs have a clamping system on the side of the stage. Table parts in anodised aluminium, linear bearings in corrosion-resistant steel. Tables can be integrated in any plane (with the micrometer below the stage in vertical orientation).
Options
- OF — without tension spring
- MF — with tension spring
- ML — micrometer front
- MS — micrometer side
Clamping is standard on the right; the customer can easily change it from right to left (except version MS).
Drawings
Type … - MS (micrometer side)
Type … - ML (micrometer front)
Dimension Tables
Dimensions (mm)
| Type | A | B | H | H1 | Dw | L | l1 | l2 | l3 | l4 | l5 | l6 | F | F1 | b1 | b2 | h | h1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NH2-40/40-AL | 19 | 40 | ± 6.5 | ± 6.5 | R2 | 40 | - | - | 4 | 32 | 37.5 | 37.5 | 39.5 | 21.5 | 4 | 32 | 6 | 2.5 |
| NH2-65/65-AL | 20 | 65 | ± 6.5 | ± 6.5 | R2 | 65 | 17.5 | 2x15 | 3.5 | 58 | 37.5 | 9.75 | 37.25 | 21.5 | 3.5 | 58 | 6.5 | 3 |
| NH2-110/110-AL | 25 | 110 | ± 20 | ± 20 | R2 | 110 | 25 | 2x30 | 6 | 98 | 80.4 | 16.4 | 46 | 30.5 | 6 | 98 | 8 | 3.5 |
Dimensions (mm) / Load capacity · Torque · Weight
| Type | e1 | e2 | e3 | e4 | u | v | x | y | z | z1 | C (N) | ML (Nm) | MQ (Nm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NH2-40/40-AL | 3.5 | 6 | M3 | 6 | 11 | 10 | 13 | 10.3 | 7.5 | 20 | 425 | 2.7 | 3.9 | 0.2 |
| NH2-65/65-AL | 3.5 | 6 | M3 | 6 | 13 | 12 | 13 | 10.3 | 7.5 | 32.5 | 850 | 7.5 | 13.5 | 0.4 |
| NH2-110/110-AL | 4.5 | 7.5 | M4 | 8 | 15 | 13 | 16 | 15.3 | 9.8 | 55 | 1420 | 12.9 | 43.5 | 1.7 |
Ordering Designation
The ordering designation combines the base model with option codes, e.g. NH2-65/65-AL-MS
(size 65/65, aluminium body, micrometer side). Combinable options are listed under Options above
(OF/MF, ML/MS). Special hole patterns or strokes on request.