18.2 Handling and Storage
MINI-X products are high-precision components and should be handled with care. For transportation of these products in-house, the following points should therefore be noted:
- Transport guideways and accessories in their original packaging
- Protect guideways against impacts
- Always transport MINIRAIL and MINISCALE PLUS carriages on guide rails or on the protective plastic rail
The following instructions should be noted to protect against damage:
- Storage in the original packaging is only possible for a limited period. The condition of the products should be checked at regular intervals.
- Do not store the products in the open. Protect them against moisture and humidity (10% – 70% non-condensing)
- Pay attention to the temperature:
| MINIRAIL | -40 °C to + 80 °C |
|---|---|
| MINISCALE PLUS | -40 °C to + 80 °C |
| MINISLIDE MS | -40 °C to + 80 °C |
| MINISLIDE MSQ | -40 °C to + 150 °C |
- Only remove the products from their original packaging at their installation location and immediately prior to assembly.
- For guideways that are delivered ready-lubricated, the lubricant should be checked (the service life of the lubricant is limited).
- Always store MINIRAIL and MINISCALE PLUS carriages on the guide rail or plastic rail so that the rolling elements are protected.
Important: Improper handling of the guideways can lead to preliminary damage and thus to premature failure. Installation should therefore only be carried out by a qualified technician.